Independent technical investigation

Window, door and hardware investigation

Manufacturers and project teams can use a structured investigation to understand a performance problem. SIIGMATIC examines the question and available evidence before proposing targeted testing or further investigation.

What the test tells you

Separate the symptom
from the cause.

Performance disputes are rarely helped by assumptions. A structured investigation can distinguish product design, manufacture, installation, interface and environmental factors — or show when more evidence is required.

Investigation work is scoped case by case. SIIGMATIC remains clear about the difference between observed evidence, measured results and engineering interpretation.

Typical scope

What we can
put under test.

01

Standards review

Identify the relevant performance requirement and what evidence exists.

02

Installation investigation

Examine interfaces, fixing, seals, drainage, alignment and site conditions.

03

Targeted testing

Recreate the suspected failure condition where useful and practical.

04

Comparative evidence

Compare installed behaviour with known-good or reference specimens where appropriate.

05

Technical reporting

Document observations, test results and the limitations of the investigation clearly.

Give the investigation a clear question

  • Describe the observed issue and the circumstances in which it occurs.
  • Identify the product and relevant design, manufacturing or installation information.
  • Explain what decision the investigation must support and which evidence is already available.

Possible causes should be tested rather than assumed. Reports distinguish observations, results and interpretation; investigation does not guarantee a particular conclusion or resolve legal responsibility.

Not sure about specimen, method or scope?

Talk before you ship it.

Ask the laboratory →