Sliding hardware · durability

Window and door hardware durability testing

Hardware manufacturers can investigate wear, operating effort and function through repeatable cycling and loading. SIIGMATIC tests rollers, carriers, locks and related window or door hardware against an agreed method or development brief.

What the test tells you

Put the hardware
through its life.

Durability testing is most valuable when it does more than produce a final pass/fail. Repeatable cycling makes it possible to see when performance begins to change and where wear is accumulating.

Accreditation / endorsement depends on the exact method and scope. SIIGMATIC can also undertake clearly identified development testing where a bespoke comparison is more useful than certification.

Typical scope

What we can
put under test.

01

Cycle durability

Repeat the prescribed movement to expose wear, looseness and loss of function.

02

Ease of operation

Measure the force required to move the system before, during or after cycling.

03

Static load

Assess hardware response under defined load conditions.

04

Roller / carrier behaviour

Observe bearings, tyres, axles, housings and adjustment mechanisms under repeated motion.

05

Development comparisons

Compare variants, materials or geometries under the same repeatable method.

Specify the hardware as a working system

  • Describe the hardware, mounting arrangement, travel and representative operating load.
  • Identify the required cycles, checks and acceptance basis where these are specified.
  • Include the mating track, fixings or other components that affect the result.

Use a repeatable setup to compare alternatives. ICP 002 and BS EN 1527-related work must be scoped to the actual product and method; do not assume every development test or standard is NATA-endorsed.

Not sure about specimen, method or scope?

Talk before you ship it.

Ask the laboratory →